Self-adhesive SBS-modified bitumen membrane with aluminium composite, glas fleece reinforcement and anti-slip surface
The membrane is eqipped with an additional torch-on selvedge to torch the side laps (e.g. if the temperature is below the recommended minimum application temperature). This prevents the below layer from thermal damages by torching.
Sand with, 8 cm selvedge (foil) on both sides
Self-adhesive (peel-off foil) with 6 cm selvedge (sand)
Self-adhesive method with / without thermal activation
Side laps min. 8 cm, end laps min. 10 cm overlap
Temperature for application min. + 10 °C (Self-adhesive method)
EN 13970
22 rolls of 10 m x 1m = 220 m² per pallet
| Characteristics | Testing method | Unit | Result |
|---|---|---|---|
| Length | EN 1848-1 | m | 10,0 |
| Width | EN 1848-1 | m | 1,00 |
| Straightness | EN 1848-1 | mm/10m | < 20 |
| Mass per unit area | EN 1849-1 | kg/m2 | NPD |
| Thickness | EN 1849-1 | mm | 3,0 |
| Watertightness | EN 1928 | kPa | 60 |
| Reaction to fire test | EN 13501-1 | Class | E |
| Shear resistance of joints | EN 12317-1 | N/50mm | ≥ 250 |
| Tensile force long./trans. | EN 12311-1 | N/50mm | 500/400 (±100/±100) |
| Elongation at single-end breaking force | EN 12311-1 | % | 4/4 (±2/±2) |
| Resistance to impact | EN 12691 | mm | NPD |
| Resistance to tearing (nail shank) long./trans. | EN 12310-1 | N | 180/180 (±50±/50) |
| Flexibility at low temperatures | EN 1109 | °C | -25 |
| Flow resistance at elevated temperature | EN 1110 | °C | 80 |
| Watertightness transmission after artifical aging | EN 1928 | kPa | 60 |
| Water vapour transmission | EN 1931 | Sd | > 1500 m |
| Water vapour transmission after artifical aging | EN 1931 | Sd | > 1500 m |
NPD = No performance determined
