SBS-modified bitumen membrane with aluminium composite and glass-fibre reinforcement
The upper side is equipped with adhesive areas by thermal activation for the bonding of EPS thermal insulation. Fast-track bitumen stripes and RELAX-technology at the bottom side equalizes vapour pressure.
Sand with integrated thermal activation stripes (foil)
Fast-track bitumen (foil) with integrated vapour pressure balancing
Torch-on method
Side and end laps min. 10 cm overlap
The stick on of polystyrene insultation plates needs to be done immediately after thermal activation of the of the adhesive areas (by melting away the upperside foil with a burner)
EN 13969, EN 13970
18 rolls of 10 m x 1m = 180 m² per pallet
| Characteristics | Testing method | Unit | Result |
|---|---|---|---|
| Length | EN 1848-1 | m | 10,0 |
| Width | EN 1848-1 | m | 1,00 |
| Straightness | EN 1848-1 | mm/10m | < 20 |
| Mass per unit area | EN 1849-1 | kg/m2 | NPD |
| Thickness | EN 1849-1 | mm | 4,0 |
| Watertightness | EN 1928 | kPa | 60 |
| Reaction to fire test | EN 13501-1 | Class | E |
| Shear resistance of joints | EN 12317-1 | N/50mm | ≥ 250 |
| Tensile force long./trans. | EN 12311-1 | N/50mm | 500/400 (±200/±100) |
| Elongation at single-end breaking force | EN 12311-1 | % | 5/5 (±3/±3) |
| Resistance to impact | EN 12691 | mm | NPD |
| Resistance to static loading | EN 12730 | kg | NPD |
| Resistance to tearing (nail shank) long./trans. | EN 12310-1 | N | 180/180 (±50/±50) |
| Flexibility at low temperatures | EN 1109 | °C | -15 |
| Flow resistance at elevated temperature | EN 1110 | °C | 70 |
| Watertightness transmission after artifical aging | EN 1928 | kPa | 60 |
| Water vapour transmission | EN 1931 | sd | > 1500 m |
| Water vapour transmission after artifical aging | EN 1931 | sd | > 1500 m |
NPD = No performance determined
