close

ALUPLAN ALGV E 40 K PLUS

Art.No. 51131

Product

SBS-modified bitumen membrane with aluminium composite and glass-fibre reinforcement

The upper side is equipped with adhesive areas by thermal activation for the bonding of EPS thermal insulation.

Top side / Bottom side

Top side

Sand with integrated thermal activation stripes (foil)

Thermal activation selvedge of 10 cm on both sides (foil)

Bottom side

Foil

Intended use

  • Vapour control layer

Application

Torch-on method

Side and end laps min. 10 cm overlap

The stick on of polystyrene insultation plates needs to be done immediately after thermal activation of the of the adhesive areas (by melting away the upperside foil with a burner)

Show more chevron_right

Standard

EN 13970

Packaging

18 rolls of 10 m x 1m = 180 m² per pallet

Characteristics Testing method Unit Result
Length EN 1848-1 m 10,0
Width EN 1848-1 m 1,00
Straightness EN 1848-1 mm/10m < 20
Mass per unit area EN 1849-1 kg/m2 4,3
Thickness EN 1849-1 mm 3,8
Watertightness EN 1928 kPa 60
Reaction to fire test EN 13501-1 Class E
Shear resistance of joints EN 12317-1 N/50mm ≥ 250
Tensile force long./trans. EN 12311-1 N/50mm 500/400 (±100/±100)
Elongation at single-end breaking force EN 12311-1 % 4/4 (±2/±2)
Resistance to impact EN 12691 mm NPD
Resistance to static loading EN 12730 kg NPD
Resistance to tearing (nail shank) long./trans. EN 12310-1 N 180/180 (±50/±50)
Flexibility at low temperatures EN 1109 °C -15
Flow resistance at elevated temperature EN 1110 °C 70
Watertightness transmission after artifical aging EN 1928 kPa 60
Water vapour transmission EN 1931 Sd > 1500 m
Water vapour transmission after artifical aging EN 1931 Sd > 1500 m

NPD = No performance determined