SBS-modified bitumen membrane with aluminium composite, polyester reinforcement and anti-slip surface
The innovative surface provides increased UV-protection, mechanical resistance and improved adhesion for the bonding of thermal insulation. It helps also for the visual detection of mechanical damages of the vapour control layer. The red signal stripe marks the membrane as vapour barrier.
Light surface protection (Slate with signal stripe) with 8 cm selvedge (foil)
Foil
Torch-on method
Side laps min. 8 cm, end laps min. 10 cm overlap
EN 13969, EN 13970
18 rolls of 7.5 m x 1m = 135 m² per pallet
| Characteristics | Testing method | Unit | Result |
|---|---|---|---|
| Length | EN 1848-1 | m | 7,5 |
| Width | EN 1848-1 | m | 1,00 |
| Straightness | EN 1848-1 | mm/10m | < 20 |
| Mass per unit area | EN 1849-1 | kg/m2 | 6,0 |
| Thickness | EN 1849-1 | mm | 5,0 |
| Watertightness | EN 1928 | kPa | 400 |
| Reaction to fire test | EN 13501-1 | Class | E |
| Shear resistance of joints | EN 12317-1 | N/50mm | ≥ 500 |
| Tensile force long./trans. | EN 12311-1 | N/50mm | 1000/800 (±200/±100) |
| Elongation at single-end breaking force | EN 12311-1 | % | 50/50 (±10/±10) |
| Resistance to impact | EN 12691 | mm | NPD |
| Resistance to static loading | EN 12730 | kg | NPD |
| Resistance to tearing (nail shank) long./trans. | EN 12310-1 | N | 220/220 (±50/±50) |
| Flexibility at low temperatures | EN 1109 | °C | -15 |
| Flow resistance at elevated temperature | EN 1110 | °C | 70 |
| Watertightness transmission after artifical aging | EN 1928 | kPa | 100 |
| Water vapour transmission | EN 1931 | Sd | > 1500 m |
| Water vapour transmission after artifical aging | EN 1931 | Sd | > 1500 m |
NPD = No performance determined
